Labels:text | screenshot | font | display OCR: The Hardware Parameters Commands are of two types. The p parameters are set by enter p followed by the number or letter of the parameter, followed by the numeric value. Few systems will require any changes from the default values. The remainder of the hardware configuration commands are straight forward. The most commonly used ones are listed below. Remember that they must be entered as shown, with a space between them . Section 2 .- Hardware Parameters Commands. port # - sets comm port to # number speed #### - Sets baud rate to #### number handshake on - Enables CTS flow control handshake both- Allows DSZ to use either CTS or Xon/Xoff flow control.
(.png)
